TV Tuner/ Video Capture PCI Card with Remote Control
CHIPSET: Phillips PCI Capture (7130) (All Driver files can be found in the PhillipsPCI folder on CD.)
*** VERY IMPORTANT – WINDOWS XP Update***
For Windows XP, you may need to install the Windows XP Installer for this device: It can be downloaded from:
Phillips Driver for TV tuner PCI Card
NOTE: It is highly recommended that you install the windows updates for your Windows 2000/XP System:
http://windowsupdate.microsoft.com Then proceed below.
1. Turn Off the Computer, Securely insert the PCI card in the PCI slot
2. Turn on the computer
Windows will auto detect new hardware:
Insert the CD and click “Next” for the next step
First the Phillips PCI Capture (SAA7130) will be installed
Select “Install the software automatically (Recommended)”
Select Search from CD.
Input Driver Path: X:\PhillipsPCI (all drivers are found in this folder)
3. Next, the Phillips TVTuner will be installed.
Select “Install the software automatically (Recommended)”
Select Search from CD
Input Driver Path: X:\PhillipsPCI (all drivers are found in this folder)
(All Driver files can be found in the Phillips PCI folder)
3. During Hardware Installation, when the popup appears: “The Software you are installing has not passed Windows Logo testing.” Select “Continue Anyway”
4. After all drivers have been installed, insert the CD back in to install the software.
From the list, select Phillips PCI (third option)
Select Install Phillips PCI-TV/Application
Setup Type: “PCI TV Series & FM Radio”
TV Country Code Configuration: Leave the default settings. If you using an antenna (NOT cable), change Receive Type to Air Antenna
5. Click Finish to reboot PC
6. Install Direct X 9.0 from the CD
WINDOWS 98
NOTE: It is highly recommended that you install the windows updates for your Windows 98 System:
http://windowsupdate.microsoft.com Then proceed below.
1. Turn Off the Computer, Securely insert the PCI card in the PCI slot
2. Turn on the computer.
Windows will auto detect new hardware:
Insert the CD and click “Next” for the next step.
First the Phillips PCI Capture (SAA7130) will be installed
Select “Install the software automatically (Recommended)”
Select Search from CD.
Input Driver Path: X:\PhillipsPCI (all drivers are found in this folder)
3. Next, the Phillips TVTuner will be installed
Select “Install the software automatically (Recommended)”
Select Search from CD.
Input Driver Path: D:\PhillipsPCI (all drivers are found in this folder)
4. After all drivers have been installed, insert the CD back in to install the software.
From the list, select Phillips PCI (third option)
Select Install Phillips PCI-TV/Application
Setup Type: “PCI TV Series & FM Radio”
TV Country Code Configuration: Leave the default settings. If you using an antenna (NOT cable), change Receive Type to Air Antenna.
5. Click Finish to reboot PC
6. Install Direct X 9.0 from the CD
Go to CONTROL PANEL > SYSTEM > DEVICE MANAGER >
SOUND, VIDEO, GAME CONTROLLERS:
Be sure that you see two Phillips devices listed:
Phillips PCI Capture (SAA7130)
Phillips TVTuner